Printer Friendly Version

Effective Date : November 1, 2013

 Technical Data Sheet

COPPER-GREEN

EPA REG. # 66591-1

A HEAVY DUTY WATER-REPELLENT WOOD PRESERVATIVE


ACTIVE INGREDIENTS :

 

*Copper Naphthenate

10%

Inert Ingredients

90%

 

100%

 

*Copper computed as elemental 1%

 

 

TO PREVENT DETERIORATION CAUSED BY

* TERMITES * POWDER POST BEETLES * FUNGUS * ROT * DECAY *

CONTROLS WARPING & SWELLING, REPELS WATER / PAINTABLE.

 

Product Description :  COPPER-GREEN Wood Preservative is an exceptionally effective, easy to use wood preservative. COPPER-GREEN Wood Preservative is a copper naphthenate and hydrocarbon solvent wood preservative that may be brush applied for surface protection of most woods. Dip soaking pressure impregnation of COPPER-GREEN Wood Preservative will result in deeper penetration resulting in longer preservation of treatable species. The copper in COPPER-GREEN Wood Preservation reacts with the cellulose of wood. As a result it is not easily lost from the wood by leaching. This formulation extends the service life of wood products.

RECOMMENDED FOR: Window frames, doors, stairs, porches, posts, siding, shingles, trellises, steps, subflooring, outdoor furniture, fence pickets, fence rails, furring strips arbors, flooring and beverage cases. Also for use on fence posts, poles, foundations, sills, decks, boats and all wood exposed to moisture or weather. COPPER-GREEN Wood Preservative can be used to treat wood for greenhouses, I.E. nursery flats, etc. In addition to preventing decay, blue stains, and insect attack on wood, this preservation controls warping, swelling, shrinking and end checking caused by changes in moisture content of lumber and plywood products. Power post beetles which invade furniture, flooring and structural lumber are controlled by application of this preservative. These insects will not attack the treated wood. Wood to be protected against subterranean termites should be treated before use in construction.

COVERAGE: Estimate 150 to 200 Sq. Ft. per gallon for brush coat or 5 to 10 gallons per 1000 board feet for dipping dimensional lumber.

AVAILABLE IN 14OZ SPRAY CANS, QUARTS, GALLONS, 5 GALLONS & %5 GALLON DRUMS.

 

Printer Friendly Version