PLASTICURE (S0LVENT BASED)
RESIN BASE
CURING COMPOUND
Meets ASTM C309-58, Type 1
Oxidizes 0 Leaves Surface
Clean
Red Fugitive Dye - Aids
Application
Coverage: 400 Square
Feet/Gallon normally
200 Square Feet/Gallon in
heat or strong wind
CAUTION
PlastiCure is a formulation
of high molecular weight polymers compounded to form an impermeable film at the surface of
fresh concrete. This film prevents the escape of surface moisture to ensure full hydration
of the concrete surface. Used as directed, it prevents surface checking and cracking, even
in hot windy weather.
CUTS LABOR
Simple spray application replaces expensive
water fogging, tedious placing of paper or polyethylene sheeting, or placing and wetting
of straw, earth, rugs or similar materials.
ELIMINATES CLEAN-UP
The PlastiCure membrane lies within the
uppermost levels of the concrete. It requires no cleaning up, scraping, rubbing,
sandblasting or other preparation of the surface. If the surface is to be painted, tiled,
or waxed, the only preparation required is simple cleaning of accumulated dirt and dust.
ONE-COAT APPLICATION
Under normal weather conditions, one coat
sprayed on at 400 FT SQ/GAL immediately after the final trowelling is all that is required
to cure the concrete to a smooth, dense surface.
PROVIDES DENSE, SEALED
SURFACE
The PlastiCure membrane within the concrete,
together with the finishing operations, provides a smooth, dense, sealed surface that is
resistant to cracking, checking and dusting under normal traffic.
